Six Easy Steps To Painting Popcorn Ceiling! – How To

Give that tired textured surface a fresh new coat with these steps.

The popcorn effect—so-called for its resemblance to America’s favorite fluffy snack—results from loose particulate materials mixed into paint and applied to a surface, usually with a sprayer. A common treatment for ceilings from the 1950s through the 1980s that offered a bit of noise reduction, popcorn ceilings lost appeal in the late 20th century, largely because the aggregates used often contained asbestos, now banned as a carcinogen. Plus, the texture was a formidable dust catcher, difficult to clean and repair. Many property owners with popcorn walls and ceilings are left asking themselves, ‘Does my business need an asbestos survey?’ which is not ideal for anyone.

Since removing a popcorn ceiling is messy at best and a costly headache if asbestos is indeed involved, you may have decided to live with one in your home. But rather than grin and bear it, why not paint it? A fresh coat will instantly lend a lighter, brighter look that will open up the room. Though not an especially challenging project for the DIYer, painting a popcorn texture properly requires certain tools and techniques. Read on for details, and you might learn how to paint popcorn ceiling into good favor once again!

MATERIALS AND TOOLS:

– Ladder
– Painter’s tape
– Plastic sheeting
– Drop cloths
– Dust mask
– Protective eyewear
– Flathead screwdriver
– Feather or microfiber duster
– Vacuum with dusting brush attachment (optional)
– Paint
– Angled paintbrush
– 5-gallon bucket with screen
– Long napped roller cover (3/4-inch nap)
– Paint roller with extension handle

STEP 1
Prep your room carefully since the texture of a popcorn ceiling is bound to cause a lot of splatter when you roll on paint. Tape plastic sheeting around the walls and cover the floors with drop cloths. Also, cover and mask any ceiling fixtures with plastic and painter’s tape.

STEP 2
Prep the ceiling edges to ensure a neat edge where the ceiling meets the wall. Don your dust mask and protective eyewear and, using a flathead screwdriver, gently scrape about 1/4 inch of the popcorn surface off the ceiling all along the edges. One of my friends who works in construction told me how he used his boom lift hire in Melbourne to achieve this effect to reach his high ceilings.

If your house was built before 1977 (the year asbestos was banned from textured ceilings), get the ceiling tested first to ensure it’s safe to work on. If it contains asbestos or lead, you’re better off leaving it alone or having professionals handle the work.

STEP 3
Use a feather or microfiber duster—or your vacuum with the soft bristled dusting brush attachment—to banish dust from all nooks and crannies so that it doesn’t speckle the paint you apply to the popcorn ceiling.

STEP 4
Pull out the paint! Popcorn and other textured surfaces require more paint to achieve full coverage, so plan to use twice as much of the supply as you would on a flat ceiling.

Cut in around the ceiling edge with an angled brush. Load the brush with plenty of paint but apply with a light touch. Once the textured aggregate gets wet, it tends to peel off, so don’t overwork any area; just gently apply paint and move on. Plan to do a second coat if you don’t get full coverage in one pass of painting a popcorn ceiling.

STEP 5
Since you won’t want to be bending to refill your roller more than necessary to paint popcorn ceiling, use a long napped roller cover to load on plenty of paint in one swoop. And, rather than a roller pan, get the sort of 5-gallon bucket with a screen or grid—that’s what pros rely on to ensure the roller is sufficiently loaded with paint. Load the roller fully, and apply to the ceiling in one direction only. Make just one pass.

STEP 6
Allow the first coat adequate time to dry per the manufacturer’s recommendation, and then roll a second coat, again in one pass only but in a direction perpendicular to the first coat. These two coats will give you the most even uniform coverage across the whole ceiling—minimum overhead for maximum color refresh.