Drain Compatibility Chart

What Is a Drain Compatibility Chart?
A drain compatibility chart helps homeowners, designers, and contractors identify which decorative drain covers fit specific drain bodies. This ensures proper installation, water management, and a seamless design finish.
Why Compatibility Matters
Choosing the wrong cover can lead to poor fit, water pooling, or installation issues. A compatibility chart provides clarity, reduces mistakes, and helps ensure that Designer Drains decorative covers integrate properly with compatible drain systems.
Drain-cover compatibility is only one part of a properly designed shower drainage system. Drain installation and other requirements should follow applicable local building codes. Contractors and installers can reference the International Plumbing Code (IPC) published by the International Code Council for additional plumbing-code guidance.
Shower Drain Compatibility Chart
Use the charts below to identify common shower drain brands, models, sizes, and replacement cover options. Because dimensions and mounting configurations can vary between models, always verify your existing drain body and measurements before selecting a replacement cover.
Square Shower Drain Compatibility Chart
| Brand / System | Common Size | Common Model / Drain Body | Mounting / Fit Notes | Designer Drains Replacement |
|---|---|---|---|---|
| Kohler | 4.25″ square | Kohler K-9136 | Verify drain body and fastening configuration before ordering | View compatible Kohler square drain covers |
| Sioux Chief | 4.25″ square | 821-200P | 2-5/8″ center-to-center fastening holes; round-to-square adapter may be required | View compatible Sioux Chief replacements |
| Schluter-Kerdi | 3.6″ × 3.6″ or 4″ square | Schluter-Kerdi / Trendline | 3.6″ version uses 4-1/4″ CTC fastening holes; 4″ Trendline version has no screw inserts | View compatible Schluter-Kerdi replacements |
| Wedi | 3.5″ × 3.5″ | Wedi square shower drain | No fastening holes; approximately 1/8″ thick on applicable covers | View compatible Wedi replacements |
| EBBE | 3.75″ × 3.75″ | EBBE E4400 | Drop-in style; no fastening holes | View compatible EBBE replacements |
| California Faucets | 5-1/4″ x 5-1/4″ | 9171–9175; adapter 9178-UG2 | Screw-free/drop-in fit depending on housing | View compatible California Faucets replacements |
| Zurn | 4-5/8″ square | Z400S | Typically 4 corner fastening holes; some covers can be ordered without holes | View compatible Zurn replacements |
| MIFAB | 4-9/16″ square; some 5″ options | F220-S | Typically 4 screw inserts | View compatible MIFAB replacements |
| Oatey | 3.875″ square | Common Oatey square drain systems | Verify fastening-hole spacing and drain body before ordering | View compatible Oatey square replacements |
| Laticrete | 4″ or 5″ square | Laticrete / Hydro Ban drain rough-in | 4 fastening holes; 4 stainless screws supplied with applicable covers | View compatible Laticrete replacements |
| FloFX | 3.85″ square | FloFX square housing | Approx. .160″ thick; no screw inserts, sits securely in housing | View compatible FloFX replacements |
| USG Durock | 3.88″ square | USG Durock square drain rough-in | Approx. .160″ thick; no fastening holes, drop-in fit | View compatible USG Durock replacements |
| Newport Brass | Approx. 4″ square system | Newport Brass 277-01 | Verify existing drain-body dimensions before ordering | View compatible Newport Brass replacements |
Round Shower Drain Compatibility Chart
| Brand / System | Common Size | Common Model / Drain Body | Mounting / Fit Notes | Designer Drains Replacement |
|---|---|---|---|---|
| Kohler | 4″ round | Kohler K-9135 | 2-5/8″ center-to-center fastening holes | View compatible Kohler round replacements |
| Oatey | 4″ round | Select Oatey round drain bodies | Verify outside diameter and screw-hole spacing | View compatible Oatey round replacements |
| Sioux Chief | 3.9″ round | Select Sioux Chief round drains | Verify center-to-center screw spacing | View compatible Sioux Chief round replacements |
| Zurn | 5″ round | Select Zurn round drain systems | Measure diameter and fastening-hole spacing before ordering | View compatible Zurn round replacements |
| Danco | 3-3/8″ round | Select Danco replacement drain applications | Measure overall diameter and screw spacing | View compatible Danco round replacements |
Compatibility Note: Drain cover dimensions and mounting configurations can vary by manufacturer, model, and installation. Always confirm the existing drain body, overall cover dimensions, and center-to-center fastening-hole spacing before ordering a replacement cover. Designer Drains manufactures aftermarket decorative replacement covers designed to fit select drain systems and is not affiliated with the original equipment manufacturers listed above.
Compatibility by Size Table
| Drain Body Type | Common Sizes | Compatible Designer Drains Covers | Best Applications |
|---|---|---|---|
| Round | 2″, 3″, 4″ | Round decorative covers | Standard showers, retrofits |
| Square | 4″, 5″, 6″ | Square decorative covers | Modern bathrooms, tile-aligned layouts |
| Linear | 24″–60″ | Linear decorative covers | Curbless showers, ADA-compliant designs |
| Tile-Insert Linear | 24″–60″ | Tile-insert covers | Luxury spa-style bathrooms |
| Custom | Varies | Custom drain covers | Unique layouts, designer projects |
How to Use the Drain Compatibility Chart
I’d move your existing “How to Use This Chart” section after the detailed tables and expand it slightly:
-
- Identify the manufacturer. Look for a brand name or marking such as Kohler, Oatey, Sioux Chief, Zurn, EBBE, Wedi, or Schluter.
- Identify the drain shape. Determine whether your existing drain is round, square, or linear.
- Measure the existing cover. Measure the outside diameter or width and length of the drain cover.
- Check the mounting configuration. If the cover uses screws, measure the distance from the center of one screw hole to the center of the other.
- Compare your measurements with the chart. Match the manufacturer, model, dimensions, and mounting configuration where available.
- Select a compatible Designer Drains cover. Follow the manufacturer link in the chart to see available decorative replacement options.
Common Drain Body Types
Round Drains
-
- Standard in most residential showers
- Compatible with Designer Drains round decorative covers
Square Drains
-
- Increasingly popular in modern bathrooms
- Compatible with Designer Drains square decorative covers
Linear Drains
-
- Best for curbless and ADA-compliant showers
- Compatible with Designer Drains linear decorative covers
Designer Drains Recommendations
-
- Use linear drains for curbless and ADA showers.
- Choose square drains for tile-aligned modern layouts.
- Upgrade round drains with decorative covers for retrofits.
- Explore custom options for unique design projects.
Final Recommendation
A drain compatibility chart ensures every remodel or new build achieves both functionality and style. Designer Drains offers handcrafted decorative covers for round, square, linear, and custom drains, making it easy to find the perfect fit.
Enjoy Designer Drains bathroom design, remodeling, and product guides? Add us as a Preferred Source on Google.