Marilyn called me in tears. She said, “Mike, my glass block shower has become a nightmare. These idiot contractors don’t know what they’re doing. The grout joints are lousy, the shower pan and walls don’t match up. Can you help me?”

I wish I could tell you this was the first time I’ve received a call from someone whose glass block shower project was not going well. You may be wondering, “Why is that?” The biggest reason is most contractors (and DIY homeowners) have not done this type of project before. They may be experienced in bathroom remodeling– but a glass block shower (a material you can’t cut to fit like tile) requires a game plan to make sure all the elements (the shower pan, glass block wall and interior shower wall panels or tile) work together seamlessly.

In this article my goal is to not only give you the 5 reasons you don’t want to build a glass block shower without a plan, but provide you with inside tips to make sure you get it done right the first time (note – I think I can help with this because I’ve been supplying and installing glass block showers since what feels like back when Moses was a boy. I started with this product line in 1985 – when I had more hair and a mustache). I don’t want you to be the next “Marilyn” I mentioned above or for your project to resemble the quote below.

“By failing to prepare, you are preparing to fail.” Benjamin Franklin

Reason to plan #1 – If your shower pan doesn’t have the same shape as the glass block wall you’ll be saying “Houston we have a problem!”  

As I mentioned before, glass blocks can’t be cut. This has major implications for why you need to plan first before starting (or buying) a shower pan. If your shower pan has too narrow a curb (the minimum curb width should be 3”) the glass blocks will be too wide for the base. Also, if you want a curved glass block wall you need to (as Steven Covey used to say) “begin with the end in mind.” Start your glass block shower design first before any shower pan is built (I’ve seen many cases where someone wanted a curved glass block wall which wouldn’t work with the shape of the blocks (note – there are pre-curved glass blocks which make it simple now to do a walk in shower).

The plan to eliminate problem #1

It’s simple to eliminate this problem. Get a glass block shower kit (which includes a shower pan and a premade glass block wall) then you know everything will work together. This takes the guess-work out of “a-hoping and a-wishing” things will turn out well. There are kits with solid surface shower pans and ready for tile bases made specifically for curved or angled glass block walls.

Reason to plan #2 – Big ugly grout joints between the blocks  

There is nothing worse than a tile or glass block job with big grout joints. They don’t look good. They are a pain in the butt to clean. Without a careful plan and knowing the actual size and shape of the glass block wall, even if you and your contractor have the best of intentions (note – the road to hell is paved with good intentions) your project may turn out below expectations. If you have a gently curved wall and use blocks which are too wide for the curve, the joints on the exterior face won’t look pretty. If you have a straight wall between two stud walls and don’t know your specific spacing before you buy blocks, you may end up having to spread out the grout joints – making them big and ugly.

The plan to eliminate problem #2

Before you start determine the shape of your wall and what type of glass block installation system you’ll use. My favorite is the Protect All glass block shower wall. This system uses a vinyl spacer which is placed vertically and horizontally through the joints so you get a small 1/8” spacing between the blocks. Determine how big your wall will be so you purchase the right blocks or prefab system up front.

Reason to plan #3 – You can’t find a contractor willing to install the glass block wall (dealing with the “can’t do” contractor)    

Do you ever feel like all the contractors in the world are “can’t do contractors?” They excel telling you what they can’t do …or what they won’t do. The contractor can’t do epidemic is only getting worse. There are more of you (people who want projects done) and less of them (qualified contractors to do the job). You have the demand – but they control the supply. When you say you want a specialty project like a glass block shower – now you’ve really made it tough on yourself (I talked to a customer of ours recently who said her contractor refused to grout the prefabricated glass block wall. This is not a difficult thing to do!!).

So how do you find a contractor (and give him/her the confidence) to install a glass block shower if they haven’t done one before?

The plan to eliminate problem #3

The answer to problem #3 is simple. Make it easy for your contractor (or yourself if you’re going to DIY the job) to do the job. You may be asking, “how can I do this. I’m just a homeowner who’s unfamiliar with this type of project?”

Here’s 3 steps you can take.

• Step 1 – You tube it up! Research the project on line. Find installation videos showing glass block showers being done (a contractor is much more likely to gain confidence watching a video than getting a detailed instruction manual to read).

• Step 2 -Find a trusted resource – If you need a heart procedure (I’ve been there, done that – 2 times – ouch!) do you want to trust someone who’s never done one before? Heck no, you want the best! So, if you don’t have a trusted resource with glass block shower experience in your town (very likely) let your Internet fingers do the walking. Look for articles, and most importantly people, who know what the heck they are talking about. If they offer the supply of these products – all the better.

• Step 3 – Refuse to let your contractor control you! – I’m amazed how many people allow the “can’t do contractor” to dictate the products they are going to use – even though they don’t like these products. As a homeowner remember YOU are the one paying the bill! It’s your right to get the materials you like. Remember this guy doing your job isn’t going to be dealing with bad product choices (or high maintenance hassles) down the road.

Reason to plan #4 – Don’t get stuck with the “old-school” mason with the “old-school” techniques

“Experience” is good if that experience is up to date with the latest technologies. I remember (back in the day – 1985 to be exact) my company’s IBM AT computer was hot technology. I was doing neat new “spreadsheets” for pricing and costing and people thought I was hot. Today people would laugh at someone using this computer.

This same thought-process about technology should apply to your glass block wall. Just because some mason contractor did a glass block wall 15 years ago, doesn’t mean he knows the best way to do your wall today.

In the “old days” (and today in many cases) contractors are installing glass block with wire reinforcing between the joints. I’ve seen cases where hard water has gotten between the mortar joints and caused this wire to rust out. This is a BIG problem. When it happens, the entire wall must be removed and reinstalled – it’s not a fun thing to tell someone.

The plan to eliminate problem #4

 Like I mentioned in reason #2, I like the approach of eliminating all wire between the blocks by using a vinyl spacer fabrication system for your glass block installation.

There are two reasons for this. First – you won’t get rust in between the blocks years down the road. Second –with this simple stack, anchor and grout system a first-time contractor or DIY homeowner can install this wall. This can save you big bucks from paying a mason (IF you can find one willing to do your job anyway. Most mason’s HATE glass blocks because they install much slower than concrete blocks or clay brick).

Reason to plan #5 – A bad case of FOMO (the Fear of Missing Out) sets in.  You do more research and find out what you could have had.   

Have you ever gotten into a remodeling project, (your spouse says you’re obsessed with it) and continue to research it further while you’re in the middle of having it done? Then you find out it’s too late to do something cool you just uncovered. That FOMO (fear of missing out) anxiety keeps you researching until the very end.

I’ve seen this element of buyer’s remorse happen with glass block projects when people realize the plain boring stuff which you used to see in home center stores (one wavy 8” x 8” block stacked on top of each other) is not all there is to this evolving building material. How can you be sure you don’t miss out on something new and cool with glass blocks?

The plan to eliminate problem #5

Once again, more research upfront is the answer to eliminating this challenge. What many people don’t realize is there are now colored glass blocks, satin-finished units, etched blocks, glass tile blocks, blocks with cool textures and patterns and even glass bricks! Search some of these terms and see a world of glass blocks you didn’t even know existed. Do this before you start building anything!

Conclusion

Like many things in life, there is more to think about with a glass block shower than initially obvious. As my Dad used to tell me, “An ounce of perseverance is worth a pound of genius, and in this family, we ain’t got no genius, so Mike you need to work your butt off.” I think what it comes down to is you to work your “research butt” off before beginning a glass block shower. This research effort will give you the best results (the base and wall will work together, the grout joints will be small, you’ll use the coolest design out there). You’ll end up with the best products, the coolest design and an installation approach that will be built to last.

If you need help with a glass block shower project, I’d love to assist (as I mentioned above I’ve been working on these projects since when Moses was a child – ha! Ha!). For more information, call 3. the numbers below or comment on this post.

###

For assistance with glass block shower walls and bases (which can be prefabricated to your specifications), call Innovate Building Solutions on a nationwide basis at 877-668-5888. For a local installation or supply project, Cleveland Glass Block (216-531-6363) or Columbus Glass Block (614-252-5888).